Top page > Products > SUPICAL

Print

SUPICAL

Plunger turns with soft touch, helps reducing re-trying count.

Introduction of "SUPICAL"

"SUPICAL"is the generic name of Turn Probes. When a probe is lightly pressed against to the print board, a plunger of the probe concurrently rotates by 90 degree at 2/3 stroke. The function of plunger-rotating provides an unerring contact comparing to the conventional straight probes. The retry rate of print board test is reduced, which can improve the reliability of the test. 5 types of "SUPICAL" are availabe by differences of pitch or materials. Receptacles matching to each type are also available. The products are conformable to the environmental laws and regulations. Please use with confidence.

Specification of “SUPICAL”

Specification
Permissibe current 3A
2A (SDY1700C1)
Turn angle 90° (2/3 Stroke)
45° (SDY1700C1)
Shape Triangle
Material / Surface treatment
Plunger SKH or SK
Ni+Au plating
Spring SWP
Ni+Au plating
Barrel C7150 Nickel / Barrel
C5191 Phosphorus bronze / Ni+Au plating

SUPICAL Item List

Name
of
product
Spring pressure Shape of tip Outline
(mm)
Material Stroke Total length
(mm)
Primary
specific gravity
2/3
Stroke
SCH2500C1 20gf 50gf Triangle φ0.72 SKH 5.00 25.00
SCH2500C2 30gf 90gf Triangle φ0.72 SKH 5.00 25.00
SCH2770C1 20gf 50gf Triangle φ0.72 SKH 4.50 27.70
SCH2770C2 50gf 120gf Triangle φ0.72 SKH 4.50 27.70
SAS3330C1 30gf 70gf Triangle φ1.37 SK 6.50 33.30
SAS3330C3 35gf 100gf Triangle φ1.37 SK 6.50 33.30
SAS3330C4 30gf 180gf Triangle φ1.37 SK 6.50 33.30
SAS3790C4 60gf 180gf Triangle φ1.37 SK 6.50 37.90
SBS3302C1 20gf 70gf Triangle φ1.02 SK 6.35 33.02
SBS3302C3 40gf 100gf Triangle φ1.02 SK 6.35 33.02
SBS3302C4 10gf 140gf Triangle φ1.02 SK 6.35 33.02
SCS2770C1 20gf 50gf Triangle φ0.72 SK 4.50 27.70
SCS2770C2 50gf 120gf Triangle φ0.72 SK 4.50 27.70
SDY1700C1 (17gf) 40gf Triangle φ0.48 SK 2.00 17.00

Please note that under the development of items, some may be subject to change without notice.